BMNVQ - PRO PRIME WHITE, 1843
- MSDS: BMNVQ
- Manufacturer: PARKER PAINT
- Product Name: PRO PRIME WHITE, 1843
- National Stock Number: 8010-00N024763
Product Identification
Product ID:PRO PRIME WHITE, 1843
MSDS Date:01/25/1989
FSC:8010
NIIN:00N024763
MSDS Number: BMNVQ
Responsible Party
US
Emergency Phone: 206-473-1122
Info Phone: 206-473-1122
Preparer: J. BURNWORTH
Cage: 9H480
Contractor
Telephone: 253-473-1122
Cage: 9H480
Ingredients
SILICONE DIOXIDE; (DIATOMACEOUS SILICA)
CAS: 68855-54-9
Fraction By Weight: 4%
OSHA PEL 0.8 MG/M3
ACGIH TLV: 10 MG/M3 TDUST
0.1@68F
CAS: 107-21-1
RTECS: KW2975000
Fraction By Weight: 2.45%
OSHA PEL 50 PPM, C
ACGIH TLV: 50 PPM,VAPOR, C
EPA Report Quantity: 1 LB
DOT Report Quantity: 1 LB
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE:OVEREXP MAY CAUSE HDCH, NAUS,
SKIN AND EYE IRRIT. CHRONIC:UNPROTECTED OVEREXP TO MISTS FROM SPRAY
APPLICATION MAY CAUSE LUNG DISEASE (SILICOSIS). INHAL OF HIGH
CONCENTRATIONS OF VAPORS MAY CAUSE HDCH, NAUS, & IRRIT OF
NOSE/THROAT/LUNGS. EYE CONT MAY CAUSE IRRIT/ BURN OF EYES. RPTD
LIQUID CONTACT (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZ:MAY CAUSE SKIN IRRITATION AND
DERMATITIS. SKIN ABSORPTION-NONE KNOWN AT THIS TIME. SWALLOWING CAN
CAUSE GI IRRIT, NAUS, VOMIT & DIARR. VOMIT CAN RESULT IN ASPIRATION
OF MATERIAL INTO LUNGS WH ICH CAN CAUSE CHEMICAL PNEUMONITIS.
Medical Cond Aggravated by Exposure:NONE KNOWN AT THIS TIME.
First Aid
First Aid:INHAL:REMOVE TO FRESH AIR. IF BREATHING HAS STOPPED, APPLY
ARTF RESP. CONSULT PHYS. EYE:WASH WITH CLEAN WATER FOR AT LEAST 15
MIN. CONSULT PHYS. SKIN:WASH AFFECTED AREA WITH SOAP AND WATER.
REMOVE CON TAMINATED CLOTHING. CONSULT PHYS. INGEST:DRINK 1 OR 2
GLASSES OF WATER TO DILUTE. CONSULT PHYS OR POISON CONTROL CENTER
IMMED.
Fire Fighting
Lower Limits:3.2%
Upper Limits:15.2%
Extinguishing Media:FOAM, ALCOHOL FOAM, CO2, DRY CHEMICAL.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:WATER MAY BE USED TO COOL CLOSED
CONTAINERS TO PREVENT PRESSURE BUILDUP AND EXPLOSIVE WHEN EXPOSED
TO EXTREME HEAT.
Accidental Release
Spill Release Procedures:VENTILATE AREA. PREVENT SKIN AND EYE CONTACT
AND BREATHING OF VAPOR. CONTAIN AND REMOVE WITH INERT ABSORBENT.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:DO NOT STORE ABOVE 200F.
Other Precautions:DO NOT TAKE INTERNALLY. KEEP OUT OF REACH OF
CHILDREN.
Exposure Controls
Respiratory Protection:NOT REQUIRED FOR BRUSH AND ROLL APPLICATION. FOR
SPRAY APPLICATION, WEAR NIOSH/MSHA APPROVED PROPERLY FITTED
(TC-23C) VAPOR/ PARTICULATE RESPIRATOR UNTIL ALL VAPORS AND SPRAY
MIST ARE EXHAUSTED.
Ventilation:PROVIDE SUFFICIENT VENT IN VOL & PATTERN TO KEEP AIR CONTAM
CONC BELOW APPLIC OSHA PEL/ACGIH OCCUP EXPOSURE LIMITS.
Protective Gloves:IMPERVIOUS GLOVES.
Eye Protection:CHEM WORK GOG OR FULL LNGTH FSHLD.
Other Protective Equipment:COVERFALLS, HOOD ARE RECOMM DURING SPRAY
APPLICATN. PROT CREAMS MAY BE USED FOR EASE OF CLEANUP, NOT FOR
PROTECTION.
Work Hygienic Practices:WASH HANDS BEFORE EATING OR USING RESTROOM.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.
Chemical Properties
HCC:N1
Boiling Pt:B.P. Text:212F,100C
Vapor Pres:SEE INGRED
Vapor Density:LTR/AIR
Spec Gravity:1.4
Evaporation Rate & Reference:SLOWER THAN ETHER
Solubility in Water:DILUTABLE
Appearance and Odor:WHITE COLORED LIQUID WITH AMMONIACAL ODOR.
Stability
Stability Indicator/Materials to Avoid:YES
NONE KNOWN AT THIS TIME.
Stability Condition to Avoid:DO NOT HEAT ABOVE 200F.
Hazardous Decomposition Products:NONE KNOWN AT THIS TIME.
Disposal
Waste Disposal Methods:DO NOT ALLOW MATERIAL TO CONTAMINATE GROUND
WATER SYSTEMS. ABSORB LARGE SPILLS WITH SAND, CLAY, OR DIATOMACEOUS
EARTH. DISPOSE IN ACCORDANCE WITH LOCAL, STATE AND FEDERAL DISPOSAL
REQUIREMENTS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.